The QLR is a double swivel ring that allows particularly fast anchoring. At the push of a button, it can be fixed in the threaded hole in a matter of seconds. Its double swivel ensures a perfect alignment with the sling.

The QL.DSR saves up to 80 % of time compared to screwing in a conventional lifting ring. The system works purely mechanically and thus requires no complex maintenance.

The swivel lifting ring QL.DSR is made of gradup steel, which stands for a better quality of the used raw materials. It has higher lifting capacities than fixed rings and has a safety factor of 5, which means that its breaking load is five times greater than the capacity indicated in the technical data sheet.

Grade: GRADE UP

Compliant to directive machine 2006/42/CE

  • Material: AISI 316L
  • Marking: According to standard, CE-marked, WLL , safety factor, individual traceability number (linked to Coditracer)
  • Temperature range: -20°C up to +200°C
  • Standard: EN 1677-1
    except grade
  • Safety factor: 5:1
Select a row from the table below, then click the add to quote button
Part Code WLL
ton
Thread Pitch
mm
Torque
Nm
Standard L1
mm
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
G
mm
H
mm
S2
mm
Weight
kg
CAD
11.44SS.QL.DSR M 8 0,25 M 8 1,25 17,5 31 30 30 38 27 14 53 9,5 18 0,3
11.44SS.QL.DSR M 10 0,4 M 10 1,5 19,5 31 30 30 38 27 14 53 9,5 18 0,3
11.44SS.QL.DSR M 12 0,65 M 12 1,75 23 40 40 45 53 38 17 76 13 27 0,9
11.44SS.QL.DSR M 14 0,7 M 14 2 23 40 40 45 53 38 17 76 13 27 0,9
11.44SS.QL.DSR M 16 1,05 M 16 2 100 27 40 40 45 53 38 17 76 13 27 0,9
11.44SS.QL.DSR M 20 1,7 M 20 2,5 30 55 55 60 83 55 25 115 19 40 2,6
11.44SS.QL.DSR M 24 2,5 M 24 3 36 55 55 60 83 55 25 115 19 40 2,6

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

To download CAD files, you must provide a valid e-mail address

Fetching the CAD file...